PIE 525B Thermocouple & RTD Calibrator

Automated, high accuracy meter calibrates 14 thermocouple and 12 RTD types

 

제품기능 및특징

Calibrate T/C instruments to 0.1 & 0.01 °F & °C

Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV

Calibrate RTD instruments to 0.1 & 0.01 °F & °C

Pt 10, 50, 100, 200, 500 & 1000 Ohm (3850)

Pt 100 Ohm (alpha=3902, 3916, 3926)

Cu 10 & 50 Ohm and Ni 120 Ohm

Calibrate with Confidence

Resolution to 0.01 °F & °C; Accurate to 0.2°C

Cold Junction Sensor Accurate to 0.05°C

Perform Heat Treating Surveys & Accuracy Tests

Meets or exceeds the requirement of AMS 2750 as both a Secondary Standard Instrument and as a Field Test Instrument

Troubleshoot RTD Sensors & Instruments

Automatic detection of 2, 3 or 4 wire connections indicates when individual wire connections are open

Verify proper instrument operation by measuring the excitation current

Faster Calibrations

Instantly select three outputs with EZ-CHECK switch

Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping

Easily Change T/C Types & Scale

Double click to select T/C type & °F & °C

Use in the Plant, Field or Shop

Includes Rubber Boot and mV Test Leads

Low profile switches resist accidental damage

Brass screws for T/C wires plus mini T/C socket

Easy-to-Read Display

Turn on the backlight to read in dark areas of the plant

Simple "No Tool" Battery Changes

Four inexpensive "AA" batteries

Verify Resistance, Cold Junction Temperature & Output

Secondary Display of Resistance for RTDs and compensated millivolt setting and cold junction temperature for T/C