Pipe Superficial Portable Rockwell Hardness Tester

Features of Pipe Superficial Portable Rockwell Hardness Tester

1. The thin wall pipe superficial hardness tester is a type of low-load Rockwell hardness tester.
2. The thin wall pipe superficial Rockwell hardness tester works on the same testing principle with high accuracy as the bench type tester, in compliance with the ISO6508.2 and ASTM E110 standards.
3. Consisting of the tester and bench stand, the superficial Rockwell hardness tester can either be used on the desk or on the shop floor.
4. The low-load Rockwell hardness tester provides non-destructive examination, with slight indentation and no damage to most workpieces.
5. Equipped with the ball indenter with the diameter of 1.588mm, the thin wall pipe superficial Rockwell hardness tester is able to test the hardness value by HR15T scale. This Rockwell hardness tester is generally used for soft materials like copper tubes, brass pipes, stainless steel pipes, aluminum pipes, among others.
6. Also, the thin wall pipe superficial Rockwell hardness tester can be optionally designed with the ball indenter with diameters of 3.175mm, 6.35mm, and 12.7mm, for testing much softer materials like silver tubes, and lead pipes, etc.
7. With more economical costs and easier operation, the superficial Rockwell hardness tester can be used to replace the Vickers hardness tester.
8. Traceable standard hardness block, and qualified indenter.
9. The dynamometer, used for checking load, can be traced to the national secondary standards.

Technical Parameters of Pipe Superficial Portable Rockwell Hardness Tester

Application of Pipe Superficial Portable Rockwell Hardness Tester

The thin wall pipe superficial Rockwell hardness tester is mainly used for hardness measurement of soft thin wall metal pipes with diameters more than 4.8mm.

Standard Package
Tester
Bench stand
1.588mm steel ball indenter
Superficial Rockwell hardness block
Flat anvil
V anvil extens
Carrying case

Optional Accessories
120°diamond indenter
1.588mm, 3.175mm carbide ball indenter
1.588mm, 6.35mm, 12.7mm steel ball indenter
Hardness block (HR15N, HR30N, HR45N, HR15T, HR30T, HR45T)
Raised spot anvil
Diamond raised spot anvil
Ball testing anvil
Spare magnifier

Model Selection