[ZAPPITEC] 도전율측정기[금속전도도측정기] DC-11M (저가형)

제품적용

Electrical conductivity measurement in non ferromagnetic metals

Non destructive alloy sorting by composition

Thermal treatment evaluation in Copper-Chromium, Copper-Zirconium and Aluminium alloys

Heat damage determination in Aluminium alloys, used in the Aerospace industry

Quality control of raw material by evaluation of purity (copper, silver, gold, aluminium)

Approximate analysis of some binary alloys

Thermal conductivity measurements in metals

제품특징

The new DC-11M Eddy Current Conductivity Meter for metals replaces our previous model (DC-10S), is easy to use and has a small diameter sensor (10mm) which allows measurements in small samples even with oxidized or dirty surfaces.

Conductivity measurements are returned in %IACS (Percentage of International Annealed Copper Standard) units and optionally in MS/m. The conductivity of copper is approximately 100 %IACS at 20°C.

Our instrument is calibrated against international standards (Boeing) and measures non-destructively based on the Eddy Current principle.

The conductivity of metals changes with temperature but readings are compensated automatically to the values at 20°C by adjustment with known standards provided with the instrument.

제품사양

3 ½ digits LCD screen

Measurement range: 5 to 110 %IACS

Precision: ± 1%

Resolution: 0.1 %IACS

Operating frequency: 60KHz

Minimum sample thickness: 0.8mm for Copper 1.0mm for Aluminum 2.5mm for Lead

Minimum measurement diameter: 10mm

Operating temperature: 10 to 35 °C

Power supply: 9V alkaline battery

Weight with case: approximately 1800g

Dimension with case: 250x280x120 mm