![[DAKOTA] 정밀초음파두께측정기 PVX](https://cdn-saas-web-116-121.cdn-nhncommerce.com/naraetek39_godomall_com/data/goods/13/01/16/15/1369227613420m0_detail.jpg "[DAKOTA] 정밀초음파두께측정기 PVX")
- PVX is equipped with an
alpha-numeric data logger to provide increased versatility for those custom
reporting needs. The high speed scan feature speeds up the inspection process by
making 32 measurements per second. Remove transducer from the test material and
display the minimum measurement scanned.Visual and audible alarm with hi and lo
limit settings for specific application tolerances. Auto find features locates
the detection point(s) and adjusts the display settings to bring the waveform
into view. PVX comes complete with our Windows® PC software for transferring
data to and from a PC.
- Physical
- Weight: 13.5 ounces (with
batteries).
- Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
- Operating Temperature:-14° to 140°F (-10° to 60°C).
- Keyboard: Membrane switch with twelve tactile keys.
- Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
- Data Output:Bi-directional RS232 serial port. Windows® PC interface software.
- Display: 1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm). EL backlit (on/off/auto).
- Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
- Ultrasonic Specifications
- Measurement Modes: Pulse-Echo
(Precision General purpose).
- Interface-Echo (Precision – Thick materials).
- Echo-Echo (Precision – Thin materials & thru-paint).
- Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
- Receiver: Manual or AGC gain control with 40dB range, depending on modeselected.
- Timing: 40 MHz with ultra low power8 bit digitizer.
- Interface-Echo (Precision – Thick materials).
- Power Source
- Three 1.5V alkaline or 1.2V
NiCad AA cells.
- Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
- Auto power off if idle 5 min.
- Battery status meter.
- Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
- Measuring
- Range: Interface-Echo Mode:
Steel 0.05 1.0 in (1.27mm – 25.4mm). Plastics from .005in.
(127mm).
- Echo-Echo Mode: Steel .006in -.500in (.15mm – 12.7mm).
- Pulse-Echo Contact: Steel .040in – 10.0in (1mm – 254mm). Plastics from .010in (.254mm).
- Echo-Echo Contact: Steel thru-paint .100in – 3.0in (2.54mm – 76.2mm).
- Resolution: (selectable) +/- .001in (0.01 mm), or +/- .0001in – (.001mm).
- Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
- Single and Two point calibration option, or selection of basic material types.
- Units: English & Metric
- Echo-Echo Mode: Steel .006in -.500in (.15mm – 12.7mm).
- Display
- A-Scan Rectified +/- (half
wave view) RF (full waveform view)
- B-Scan Time based cross section view. Display speed of 15 secs per screen.
- Large Digits Standard thicknessview. Digit Height: 0.400 in (10mm).
- Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
- Repeatability Bar Graph Bar graphindicates stability of reading.
- B-Scan Time based cross section view. Display speed of 15 secs per screen.
- Data Logger (Internal)
- 12,000 readings and waveforms
(alpha numeric storage).
- OBSTRUCT to indicate inaccessible locations.
- Memory: 16 megabit non-volatile ram.
- OBSTRUCT to indicate inaccessible locations.
- Transducer
Types:
- Single Element (1 to 20
MHz).
- Locking quick disconnect “00″ LEMO connector.
- Standard 4 foot cable.
- Custom transducer and cable lengths available.
- Locking quick disconnect “00″ LEMO connector.
- Features
- Setups: 16 factory and 48
user-defined setups.
- Gates: Single gate in pulse-echo mode.Single gate with holdoff in interface-echo, echo-echo, and plastics mode. Adjustable threshold.
- Multiple Measurement Modes: Selectable modes for use with a variety of applications.
- Alarm Mode: Set hi and lo tolerances withaudible beeper and visual LEDs.
- Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
Display continuously updates while scanning. - Gates: Single gate in pulse-echo mode.Single gate with holdoff in interface-echo, echo-echo, and plastics mode. Adjustable threshold.
- Certification
- Factory calibration: traceable tonational standards.
- Warranty
- 2 year limited
![[LEEB 리브] 초음파두께측정기 LEEB-332](https://cdn-saas-web-116-121.cdn-nhncommerce.com/naraetek39_godomall_com/data/goods/16/11/04/2168/1478243022825s0_main.jpg "[LEEB 리브] 초음파두께측정기 LEEB-332")
![[DAKOTA] 멀티모드초음파두께측정기 MMX-6/MMX-6DL (단종) -> ZX-6/ZX-6DL](https://cdn-saas-web-116-121.cdn-nhncommerce.com/naraetek39_godomall_com/data/goods/13/01/16/10/137144769864s0_main.jpg "[DAKOTA] 멀티모드초음파두께측정기 MMX-6/MMX-6DL (단종) -> ZX-6/ZX-6DL")
![[LINSHANG] 초음파두께측정기 LINSHANG LS212](https://cdn-saas-web-116-121.cdn-nhncommerce.com/naraetek39_godomall_com/data/goods/22/08/25/2568/1661387255848s0_main.jpg "[LINSHANG] 초음파두께측정기 LINSHANG LS212")
![[DAKOTA] 정밀초음파두께측정기 PZX-7/PZX-7DL](https://cdn-saas-web-116-121.cdn-nhncommerce.com/naraetek39_godomall_com/data/goods/19/07/19/2441/1563499770942s0_main.jpg "[DAKOTA] 정밀초음파두께측정기 PZX-7/PZX-7DL")
